Installing a metal roof on your home is a wise investment. A metal roof not only provides a long service life, but also adds curb appeal and benefits like durability, weather-resistance and reduced utility expense. Spann has installed Residential Metal roofs for many happy satisfied local clients throughout South Carolina.
With a variety of choices such as Standing Seam, Multi-rib Corrugated Panels, and 5V we are there to guide you though the process of the best metal roof for your unique situation.
Standing seam roof panels are a concealed fastener metal panel roof system with a raised seam and flat area between the seams. Many different type of panel types are available, mostly based on the type of application that is required. Roof panel seams can be snapped together or mechanically seamed together depending on the type of application and location of the project. Roof panel widths vary from 12” to 20” and seam height range from 1” tall to 2” tall.
Spann Roofing recommends standing seam roof panels due to the fact that all fasteners are concealed beneath the roof panels and no fasteners are exposed to the environment. Standing seam is available in a variety of colors and can be fabricated out of painted galvalume or painted aluminum.
5V, which many may know as “barn tin”, is another low-cost alternative for Homeowners looking to install a new metal roof on their home. The 5V roof panels are similar to the corrugated metal panel roof as they are attached using exposed fasteners through the field of the roof.
5V roof panels are what was commonly used as the roof system for barns, sheds and other structures where a low-cost roofing material could be installed over open framing. 5V roof panels are available in bare finish galvalume as well as painted galvalume (select colors available).
Corrugated metal panel roof systems, or often times referred to as screw-down metal roof panels, are a ribbed metal roof panel which are attached to the roof substrate using exposed fasteners spread out across the field of the roof and at the laps of the metal panels. Typically, ribs are spaced at 9” or 12” on center and anywhere from 7/8” to 1-1/2” tall.
Corrugated metal roof panels are normally fabricated out of painted or bare finish galvalume, and are available in many colors. Corrugated metal panel roof systems offer homeowner a cheaper alternative that want the metal roof look for their home. However, it is homeowner for homeowners to acknowledge that exposed fasteners can lead to issues over time as these fasteners tend to deteriorate quickly over time and can lead to water infiltration if properly maintained.
Over the course of more than 65 years, Spann Roofing has roofed over 15,000 commercial and residential buildings and our guarantee stands behind every one of them. We have developed a reputation for an honest, trusted service that will provide quality and reliability regardless the size or complexity of the job. Our services are not limited to commercial roofing.
Spann Roofing is equipped for the installation, roof repair and maintenance of residential buildings across the area.
Over the course of more than 65 years, Spann Roofing has roofed over 15,000 commercial and residential buildings and our guarantee stands behind every one of them. We have developed a reputation for an honest, trusted service that will provide quality and reliability regardless the size or complexity of the job. Our services are not limited to commercial roofing.
Spann Roofing is equipped for the installation, roof repair and maintenance of residential buildings across the area. Spann Roofing is centrally located in Horry County at 459 Allied Drive in Conway, across 501 from Coastal Carolina University.
"*" indicates required fields
© 2024 SPANN Roofing & Sheet Metal, INC. | 459 Allied Drive, Conway, SC 29526
Privacy | Terms | Employment